Showing posts with label card tutorial. Show all posts
Showing posts with label card tutorial. Show all posts

Wednesday, February 8, 2017

Watercooler Wednesday - #105 Marsha's Colour Inspiration Challenge


Watercooler Wednesday has rolled around again and this time we are having a colour challenge brought to you by Marsha.  WWC105 features a lot of colours but Marsha has indicated you can use a minimum of three plus a neutral of your choice.  I'm not sure what colours you see when you look at this display, but based on Stampin' Up! ink colours, I see  Mint Macaroon, Pirouette Pink, Blushing Bride, Rich Razzleberry, Always Artichoke and Smokey Slate
Here Is My Card:


My inspiration for this card came from Caro Thomas who show cased some beautiful masculine cards in June 2016, using the Swirly Scribbles Thinlet diesI really liked how she inlaid the colour pieces in the die cut.  

Initially I planned to CASE her card substituting the colours from this challenge, but after playing with the die cuts a bit I decided to change up my design and only used her colour matchup on the inside of the card.  

Supplies:
Stamp Sets:  Jar of Love #141587 and Delicate Details #143214 (SAB)
Ink:  Rich Razzleberry, Smokey Slate, Pink Pirouette, Always Artichoke, Blushing Bride - Markers 
Card Stock:  Rich Razzleberry, Always Artichoke, Pink Pirouette, Smokey Slate and Whisper White
Accessories:  Big Shot, Trimmer, Swirly Scribbles Thinlet Dies, Spray Mister, Heat Gun, Festive Embossing Folder, Tom Bow Adhesive, Adhesive Remover
Swirley Scribbles Thinlet Dies #141497
Festive Texture Embossing Folder #141471

How It's Made: 

  1. Cut card base from 8 1/2" x 5 1/2" Smokey Slate card stock
  2. Cut 1st mat 5 1/4" x 4" from Rich Razzleberry and glue to base
  3. Cut 2nd mat 3 7/8" x 5 1/8" from Always Artichoke and glue to 1st mat
  4. Cut a piece of Whisper White for the top mat measuring 3 3/4" x 4 7/8".
  5. Place the wavy die from Swirly Scribbles on the long side of this mat so that it's closer to the left edge, and run through the Big Shot.  Retain all pieces. 
  6. Cut a strip of Watercolour Paper to measure 1 1/2" x 4 7/8".  This will be the base for your colour and for adding the cut out pieces of the Swirly Scribbles. 
  7. I used markers to colour five striped bands along the length of this piece.  The bands were at least an inch high.  Once all the colour has been added spray the bands with water and allow the ink to flow.  Dry with a piece of paper towel and a heat gun.  
  8. When this piece is dry run it through the Big Shot in the Festive Embossing folder. 
  9. Add adhesive to the Swirly wave piece center and glue to the watercolour strip. Then glue the two cut out pieces to each side.  You now have a rectangle.  
  10. Stamp the "thank you" sentiment from Jar of Love below the swirl in Rich Razzleberry ink.
  11. Ink up the thin lace strip from the Delicate Details and stamp along the top and bottom edge of the card, getting as close to the edge as possible.  Glue this mat to the Always Artichoke mat.
  12. Add random sprays of Basic Pearls.
  13. Finish the inside of the card with a 4" x 5 1/4" mat of Whisper White card stock.  I cut Swirly waves from Always Artichoke, Smokey Slate and Pirouette Pink.  I adhered the Always Artichoke to the Whisper White mat and then fitted in pieces of the other colours and adhered with Tom Bow glue.  
  14. I didn't use a sentiment on the inside of the card because I wanted room to hand write my message of thanks. 
I really like how the band of colour beneath the Swirly Wave turned out.  The watercolor piece was perfect and once it was embossed the details reminded me of effervescence in the water.  This step could be done in two other ways:
  1. By gluing strips of coloured card stock to a piece of Whisper White and then embossing it or, 
  2. colour block a strip of Whisper White with your ink pads or by inking up an acrylic block and stamping bands of colour.  

I liked the effect I got with the markers and it was so fast and simple. I also like the basic pearls as they seem to carry along the idea of bubbles.
The beautiful stamped lace from the Delicate Details stamp set added some balance to the card.  It's stamped in Blushing Bride ink.  I know I'm going to be using this stamp set a lot.  I got mine for free from the Sale-A-Bration catalogue after I placed a $60.00 order. 
 

Well that's it for today.  I hope you enjoyed this card and will leave me a comment.  Also I hope you'll visit the other Watercooler Wednesday Design Artist's sites to see their projects.  I know you'll love them.  

This challenge linky is open until 5:00 pm MT Monday February 13th so I hope you'll play along with us.  We always love to see how we've inspired others.  Who knows you may be the next papercrafter to "Rock the Watercooler".

Happy Stamping!
Penny Tokens Stampin' Spot

Friday, May 23, 2014

Petal Parade Double Time Stamping

Unfortunately I didn't get to play much with the free stamps and products I earned from the Sale-a-bration catalogue this year as we were away.  

One of the stamps I had been eager to use was the Petal Parade set.  I liked the look of the flower and leaf images. 

Now that I'm back home and stamping on Tuesdays, I've had an opportunity to ink up this stamp and I love the results. I think you will too when you see these five cards. 
 
Here Are My Cards:

Card One is a Double Time card stamped on Naturals Ivory cardstock. To achieve the double time effect you center the Natural Ivory layer over top of the card base with repositioning tape and then stamp your images all over the cardstock.  Remove the top layer and adhere it to the Always Artichoke layer.  Add the ribbon to this layer and tie a bow.  Take the Always Artichoke layer and adhere it to the card base matching up the flower images that have over lapped and adhere it with adhesive.  
 Supplies:
Stamp Sets:  Petal Parade (SAB 2014 retired), Perfectly Penned
Ink:  Sahara Sand, So Saffron, Always Artichoke, Early Espresso
Card Stock:  Naturals Ivory measuring 4 1/4" x 11" for card base and scored at 5 1/2". Cut another layer to measure 3 3/8" x 4 7/8".  Always Artichoke layer measures 3 5/8" x 4 7/8".  
Accessories:  Ribbon 10 inches in Daffodil Delight, Adhesive, Trimmer
 
The inside of the card was left blank except for the flowers and leaves.

The Happy Birthday sentiment is from the Perfectly Penned Stamp set.

Perfectly Penned a 4 piece stamp set on page 95 of the Idea Book and Catalogue will retire on May 31st of this year. 
 
Card Two:  This is the same as card one but instead of the Naturals Ivory I've used Whisper White card stock.  All measurements and other materials remain the same.  The images are quite a bit crisper on the Whisper White and it doesn't have the homespun a look as Card number One. 

Here are Cards One and Two together.

Card Three is a side-fold card once again the Petal Parade stamp set stamped in the new Stampin' Up! In Colours - Blackberry Bliss, Lost Lagoon and Hello Honey.  

Supplies and Measurements:

Stamp Sets:  Petal Parade, Work of Art (NEW)

Ink:  Lost Lagoon, Hello Honey and Blackberry Bliss

Card stock:  Whisper White card base measuring 4 1/4" x 11 and scored at 5 1/2".  Whisper White layer measuring 3 3/8" x 4 5/8", Rich Razzleberry layer measuring 3 5/8" x 4 7/8" and a Sage Shadow layer measuring 4 x 5 14" and embossed with the Designer Dots embossing folder.  

Accessories:  Dimensionals, Designer Dots Embossing Folder, Big Shot and Trimme


Card Four is a side fold card that uses the Emboss Resist Technique.  This card uses the same cardstock, ink and measurements as Card Three.  The only additional accessories you'll need are a heat tool, Versa Mark Ink, Clear Embossing Powder, Basic Rhinestones and a sponge dauber. 

I stamped the leaves with Versa Mark Ink randomly across the White Layer, covered with Embossing Powder and then heat set it with the heat tool.  I then did the rest of the stamping on the card.  I stamped off some of the smaller flowers so the images were faded.  Once all the stamping was done I rubbed over the embossed areas with Lost Lagoon ink and the sponge dauber to bring colour to those areas. 

Card Five uses the Resist Embossing Technique too but I've changed up the colours and added a small banner.  This is a top fold card.   

The leaves were embossed using Versa Mark ink and Clear Embossing Powder.  The colour was applied with a sponge dauber once all the stamping was finished on the layer.

The sentiment "Fabulous is what you are" is from the Million and One stamp set and is stamped in Coastal Cabana ink on the inside of the card. 

The sentiment on the banner was stamped in Blackberry Bliss on a piece of Whisper White card stock and then cut out using the small banner from the Chalk Talk framelits set.  I used the next size framelit to cut out a piece of Elegant Eggplant cardstock to use as a mat for the sentiment.  The small flowers were cut out with the Itty Bitty Punch. 
 Stamps:  Petal Parade, Perfect Pennants, Million and One.

Card stock:  Whisper White, Elegant Eggplant, Coastal Cabana.

Ink:  Crumb Cake, Blackberry Bliss, Elegant Eggplant, Coastal Cabana, and Versa Mark 

Accessories:  Chalk Talk Framelits, Itty Bitty Punches, Basic Rhinestones, Clear Embossing Powder, Heat Tool, Adhesive, Dimensionals, and a Sponge Dauber.

Thanks for dropping by and visiting my blog.  Leave me a comment if you think these posts are good and inspiring you to stamp or try a new technique.

Penny 
Happy Stamping! 

NOVEMBER HOSTESS CODE

Happy November everyone!  I've just returned from vacation and here it is already the 6th of November, the leaves have turned, the elect...